18 Aug Wall Mounted Dehumidifier
Dehumidifying Capacity: 100 liter / day @ 30°C, 80%RH
Our Wall Mounted Dehumidifier is designed to effectively remove the excess moisture to help keep the treated room dry. The dehumidifier is built with a slim construction, which can be installed at tight space area. And it is designed with good air flow circulation to ensure the ambient air is evenly dehumidified.
- Our dehumidifier is designed with bottom inlet and direct front discharge at the top to create a good circulation of air.
- Body material of the dehumidifier is made of cold-rolled sheet metal with epoxy powder coating paint
- Evaporator and Condenser of the dehumidifier is epoxy-coated for better durability and corrosion resistant.
- Low maintenance cost and energy efficient design dehumidifier.
- Dehumidifier equipped with reliable and high-performance Danfoss or Panasonic reciprocating compressor with environmental friendly refrigerant R410A.
- Energy Saving, High Efficiency AC / EC Centrifugal Fan with low noise and variable speed built into the dehumidifier.
- Aluminum Mesh Filter for heavy duty usage and washable is provided in the dehumidifier.
- The dehumidifier is built with reliability for long hour operation 24/7.
- Advance touch button controller with built-in temperature and humidity sensor. It is easy to operate the dehumidifier.
- Honeycomb Structure Evaporator with blue coated hydrophilic water-repellent, which provide better efficiency to dehumidify the air
- Water Drain Pan is made of SUS304 stainless steel to prevent corrosion damage.
|Wall Mounted Dehumidifier
|Dehumidifying Capacity @ 30°C, 80%RH
|100 liter / day
|Air Flow Rate
|1000 – 1200 m³/h
|230 / 1PH / 50Hz
|AC type or EC – Electronically Commutated
|Aluminum Centrifugal Type
|2 steps or Variable Speed Control up to 10 levels
|Digital Controller with Honeywell Temperature and Humidity Sensor
|Controller Accuracy with programmed logic
|5 – 38°C
|G4 efficiency – Washable Aluminium Mesh Filter
|1.2mm SPCC cold rolled metal body with thick frame
|Industrial Grade Powder Coated
|Durable Aluminium Mesh Filter
|SUS304 Stainless Steel
|Condenser and Evaporator
|Honeycomb Aluminum Fins with Hydrophilic coating
|Patented automatic defrosting system – able to operate at 5°C of low temperature
|Low Pressure Protection
|Electrical / Water Protection
|I / IPX3
|Delayed startup protection
|Drain Hole Size
|Refer to individual drawing as per attached
*Technical specification and dimensions are subject to change without prior notice